1. a string of pipe used to case open hole below existing casing. A liner extends from the setting depth up into another string of casing, usually overlapping about 100 feet (30.5 meters) above the lower end of the intermediate or the oil string. Liners are nearly always suspended from the upper string by a hanger device. 2. a relatively short length of pipe with holes or slots that is placed opposite a producing formation. Usually, such liners are wrapped with specially shaped wire that is designed to prevent the entry of loose sand into the well as it is produced. They are also often used with a gravel pack. 3. in jet perforation guns, a conically shaped metallic piece that is part of a shaped charge. It increases the efficiency of the charge by increasing the penetrating ability of the jet. 4. a replaceable tube that fits inside the cylinder of an engine or a pump. See cylinder liner.